# Cubic Yards vs Cubic Feet: How to Convert

_Published October 16, 2026_

**In short:** One cubic yard is 27 cubic feet, because a yard is 3 feet and 3 x 3 x 3 = 27. Divide cubic feet by 27 to get cubic yards: 100 cubic feet is 3.70 cubic yards. Bulk materials are sold by the yard and bags by the cubic foot, so convert before you compare.

## Two units, one factor: 27

Cubic feet and cubic yards measure the same thing, volume, in different sizes. A cubic yard is a cube 3 feet on every side, so it holds 3 x 3 x 3 = 27 cubic feet. That single factor is all you need to move between them.

```
cubic yards = cubic feet / 27
cubic feet = cubic yards x 27
```

NIST's conversion tables, which define the units in metric terms, list one cubic yard as 0.7645549 cubic meters and one cubic foot as 0.02831685 cubic meters. The ratio of those two numbers is 27, to the digits shown. The [cubic feet to cubic yards calculator](../../cubic-feet-to-cubic-yards-calculator/) applies it for you.

## Why both units show up

Suppliers of bulk mulch, soil, gravel, sand and concrete sell by the cubic yard. Bags of the same materials are labeled in cubic feet, and so are most rooms, trenches and beds when you measure them in feet. A typical shopping trip needs both: you measure in feet, convert to yards for the delivery, and compare against bags in cubic feet. Mixing the two without converting is the most common way to order ten times too much or too little.

## Cubic feet to cubic yards, at a glance

| Cubic feet | Cubic yards |
| --- | --- |
| 10 cu ft | 0.37 |
| 27 cu ft | 1.00 |
| 54 cu ft | 2.00 |
| 100 cu ft | 3.70 |
| 250 cu ft | 9.26 |
| 500 cu ft | 18.52 |

Hunker puts the same idea in terms of a block: a cubic yard is the volume of a 3 x 3 x 3 foot block, which is 27 cubic feet.

## Cubic yards to bags

To compare bulk with bags, divide the 27 cubic feet in a yard by the cubic feet printed on the bag. A cubic yard is 9 bags of 3 cubic feet, 14 bags of 2 cubic feet (13.5, rounded up), 18 bags of 1.5 cubic feet and 27 bags of 1 cubic foot. Hunker likewise says a cubic yard of mulch takes 14 two-cubic-foot bags. Always use the size on the bag you are actually buying.

## Worked example: a 20 x 10 foot bed, 3 inches deep

The depth is in inches, so convert it to feet first: 3 inches is 0.25 feet. Then 20 x 10 x 0.25 is 50 cubic feet, and 50 divided by 27 is 1.85 cubic yards. The [cubic yard calculator](../../cubic-yard-calculator/) gives the same answer and also converts to cubic meters and US gallons.

## The mistake that costs the most: inches as feet

Enter the 3 inches as 3 instead of 0.25 and the same bed becomes 20 x 10 x 3 = 600 cubic feet, or 22.2 cubic yards. That is twelve times too much, and it is easy to do when one number on your tape is in inches and the rest are in feet. Before you multiply, put every dimension in the same unit. Switching the calculator's unit to inches, and entering all three dimensions in inches, avoids the problem.

## Cubic yards in metric

If you have a metric measurement, one cubic yard is 0.765 cubic meters, so a cubic meter is about 1.31 cubic yards. This helps when a quote comes from a source that uses metric units. Divide by 0.7646 to go from cubic meters to cubic yards.

## A shortcut when you know area and depth

You do not always need the cubic feet in the middle. Hunker's mulch chart shows that a cubic yard covers 324 square feet at 1 inch deep. That is 324 x (1/12) = 27 cubic feet. So multiply the area in square feet by the depth in inches and divide by 324 to get cubic yards directly. The same shortcut works for any loose material, and it saves the step where the inches-to-feet conversion goes wrong.

## Common mistakes

- **Dividing by 9 or 3.** A square yard is 9 square feet, but a cubic yard is 27 cubic feet. Volume uses the cube of 3.

- **Mixing units.** Feet, inches and yards in one multiplication give a wrong answer.

- **Forgetting the depth.** Cubic yards need three dimensions, and square footage alone is not enough.

- **Ordering the exact number.** Soil settles and mulch compresses, so add a small allowance.

- **Treating a pickup as a yard.** A pickup is limited by weight, not just volume, so a cubic yard of heavy material may need more than one trip. The 20 x 10 foot bed above comes to about 2 pickup load by volume.

## What else to consider

If you know the area and the depth, the [mulch calculator](../../mulch-calculator/) and the soil calculators do the unit work for you. Treat the results as planning estimates and confirm quantities with your supplier.

## Frequently asked questions

### How many cubic feet are in a cubic yard?

27. A cubic yard is a cube 3 feet on each side, and 3 x 3 x 3 = 27 cubic feet.

### How do I convert cubic feet to cubic yards?

Divide by 27. For example, 100 cubic feet is 3.704 cubic yards, and 54 cubic feet is exactly 2.00 cubic yards.

### How many 2 cubic foot bags make a cubic yard?

13.5, so you buy 14 bags in practice. For 3 cubic foot bags it is 9 bags, and for 1.5 cubic foot bags it is 18.

## Sources and further reading

- [NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically](https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b8) — National Institute of Standards and Technology
- [How Much Will a Cubic Yard of Mulch Cover?](https://www.hunker.com/12387292/how-much-will-a-cubic-yard-of-mulch-cover/) — Hunker
