# How Many Pavers Do You Need for a Patio?

_Published October 13, 2026_

**In short:** A 12x12 ft patio (144 sq ft) needs about 651 pavers of 8x4 inches, or 153 pavers of 12x12 inches, with 1/4 inch joints and 10 percent extra. Paver size changes the count enormously, and the laying pattern changes the extra you should buy.

## Start with area, then divide by one paver

The paver count comes down to one division: the patio's area over the area one paver covers. Hunker's paver guide spells out the method in square inches. Multiply the paver's length by its width, multiply the patio's square footage by 144 to convert it to square inches, and divide. That gives the minimum count before any extra for cuts and breakage.

```
pavers = patio area (sq in) ÷ one paver (sq in)
order = pavers × (1 + extra for your pattern)
```

A 12x12 foot patio is 144 square feet, or 20,736 square inches. A 12x12 inch paver covers 144 square inches, so the minimum is 144 pavers. That is the pencil answer, and the real order is a bit higher for two reasons: the joints and the cuts.

## Joints make each paver cover more

Pavers are not laid edge to edge. Each one carries a joint, typically somewhere between 1/8 and 3/8 inch, and that joint is part of the area the paver takes up. With a 1/4 inch joint a 12x12 inch paver effectively covers 12.25 by 12.25 inches, so you need slightly fewer than one per square foot: 0.96 per square foot instead of 1.00. On large pavers the effect is small. On small ones it adds up, because every paver is a bigger share of the joints. Hunker's article does not cover joint width in its counting method, so if you are following only that method, expect to land a few percent higher than the [paver calculator](../../paver-calculator/), which includes the joint.

## Pavers for a 12 x 12 patio by paver size

All rows use a 144 square foot patio, 1/4 inch joints and the 10 percent extra of a basket weave or 90-degree herringbone.

| Paver size | Pavers per sq ft | Pavers to order |
| --- | --- | --- |
| 8 × 4 in | 4.11 | 651 |
| 6 × 6 in | 3.69 | 584 |
| 12 × 12 in | 0.96 | 153 |
| 16 × 16 in | 0.55 | 87 |
| 24 × 24 in | 0.25 | 39 |

The same patio takes 651 small brick-style pavers or 39 large slabs, so always count in the size you actually plan to buy. Tell the supplier your patio area too, because pavers are often sold by the pallet or by the square foot rather than by the piece.

## How much extra to order

The extra covers pavers you cut at the edges and the odd one that chips. How much you need depends on the pattern. Hunker gives 5 to 10 percent for a linear grid, 10 percent for running bond, herringbone and basket weave, and at least 20 percent for diagonal and rounded layouts. The calculator's own settings are 5 percent for running bond or stack, 10 percent for basket weave or 90-degree herringbone, and 15 percent for 45-degree herringbone or circular.

Those two lists do not agree for diagonal and circular layouts, and that is a good reason not to treat either as exact. Treat the calculator's number as the floor, and lean toward the higher end when you have lots of angle cuts or curves.

On a 12x12 patio of 12x12 inch pavers the pattern moves the order from 146 pavers at 5 percent to 153 at 10 percent and 159 at 15 percent. Seven pavers either way is cheap insurance, because a color batch you reorder later may not match.

## Worked example: a 10 x 15 patio with 6 x 9 inch pavers

A 10 by 15 foot patio is 150 square feet. With 6 by 9 inch pavers and a 1/8 inch joint, that works out to about 2.58 pavers per square foot. Laid in a running bond with 5 percent extra, the order is 406 pavers. Switch the same patio to a pattern with more cuts and the number rises, so settle on the layout before you place the order.

## Common mistakes

- **Ignoring the joint.** On small pavers it changes the count by enough to matter.

- **Counting in the wrong size.** Check whether the listed size is the paver itself or a nominal size.

- **Ordering the exact count.** One cut per edge row eats a surprising number of pavers.

- **Picking the pattern after you order.** A diagonal layout needs a bigger cushion than a straight one.

- **Buying the pavers in two lots.** Color varies between production runs, so buy the extra with the rest.

## What else to order

Pavers are only the top layer. Unilock's chart gives patio base depths of 6 inches in sandy soil, 8 inches in silty soil and 10 inches in clay, with an inch of sand on top. The paver calculator's default base is 4 inches, which gives 1.96 cubic yards of gravel for a 12x12 patio. At a 6-inch base the same patio needs 2.93 cubic yards, so set the base depth to match your soil. Add edge restraint around the perimeter, polymeric or joint sand, and a plate compactor, which most rental yards stock.

## Frequently asked questions

### How many pavers do I need for a 12x12 patio?

It depends on the paver size. A 144 square foot patio takes about 651 pavers of 8x4 inches, 584 of 6x6 inches or 153 of 12x12 inches, using 1/4 inch joints and 10 percent extra.

### How many extra pavers should I buy?

Plan on 5 to 10 percent extra for a straight pattern and 10 percent for running bond, herringbone or basket weave. Hunker's guide says at least 20 percent for diagonal or rounded layouts.

### Does the joint width change how many pavers I need?

Yes. Each paver covers its own size plus its share of the joint. With a 1/4 inch joint, 12x12 inch pavers cover about 0.96 per square foot instead of 1.00, so you need slightly fewer.

## Sources and further reading

- [How to Calculate Brick Pavers for a Patio](https://www.hunker.com/13424686/how-to-calculate-brick-pavers-for-a-patio/) — Hunker
- [Paver Base Specifications](https://unilock.com/diy/paver-base/) — Unilock
