# How Many Rolls of Wallpaper Do You Need?

_Published October 25, 2026_

**In short:** Subtract doors and windows from the wall area, then divide by the usable yield of one single roll, which is 25 square feet for a small repeat and drops to 18 for a 19 to 23 inch repeat. A 14x12 foot room with one door and two windows has 365 square feet of wall, about 15 single rolls, or 8 double rolls, at 10 percent extra.

## The method: net wall area divided by usable yield

Wallpaper is sold by the roll, but only part of each roll ends up on the wall, because the pattern has to line up from strip to strip. The standard method is to find the net wall area, then divide by the usable coverage of one roll. Sherwin-Williams' wallpaper estimating guide breaks it into steps: add the room's length and width and double it to get the perimeter, multiply by the ceiling height to get the wall area, subtract 20 square feet for each standard window or door, and divide by the per-roll yield for your pattern repeat, rounding up to whole rolls.

```
rolls = (perimeter x height - openings) / usable yield per single roll
```

## Usable yield depends on the pattern repeat

Sherwin-Williams gives these usable yields per single roll, which already allow for matching the pattern:

| Pattern repeat | Usable yield per single roll |
| --- | --- |
| 0 to 6 inches | 25 sq ft |
| 7 to 12 inches | 22 sq ft |
| 13 to 18 inches | 20 sq ft |
| 19 to 23 inches | 18 sq ft |

The larger the repeat, the more paper is cut away when you match one strip to the next. For repeats longer than 23 inches, Sherwin-Williams suggests asking a store salesperson.

## Worked example: a 12 x 15 foot room, 15 inch repeat

Sherwin-Williams works one through: the perimeter is (12 + 15) x 2 = 54 feet, and with 8 foot ceilings the wall area is 432 square feet. A door and two windows are 3 x 20 = 60 square feet, leaving 372 square feet. Divide by 20 square feet per roll for a 15 inch repeat and you get 18.6, which means 19 single rolls. Many papers come only in double rolls, so the order rounds up to 20 single rolls, which is 10 double rolls. If the paper comes only in triples, 21 single rolls is 7 triples.

## Using the calculator

The [wallpaper calculator](../../wallpaper-calculator/) uses a slightly different approach: it takes your net wall area, adds an allowance for the pattern, and divides by the usable coverage of a roll, which it assumes is 28 square feet and which you can change. For a 14 x 12 foot room with 8 foot walls, one door and two windows, the net wall area is 365 square feet. With the calculator's default small-repeat allowance of 10 percent, that comes to 15 single rolls, or 8 double rolls.

| Pattern | Extra allowance | Single rolls | Double rolls |
| --- | --- | --- | --- |
| Plain or texture | 5% | 14 | 7 |
| Small repeat, under 6 in | 10% | 15 | 8 |
| Medium repeat, 6-12 in | 15% | 15 | 8 |
| Large repeat, over 12 in | 25% | 17 | 9 |

The calculator deducts about 21 square feet per door and 15 per window, so its net area differs slightly from Sherwin-Williams' flat 20. Treat the result as a cross-check and put your wallpaper's real usable coverage into the roll field, because that figure is on the label.

## Papering only one wall

An accent wall needs a fraction of the order. In the same 14 x 12 foot room, papering one wall comes to 5 single rolls. Use the same pattern allowance, because the repeat wastes the same share of paper however many walls you do.

## Single, double and triple rolls

Sherwin-Williams notes that wallpaper is priced by the single roll but is often sold only as a double or triple roll. Check what the package contains before you divide, or you may buy twice what you need or half.

## Buy one extra and match the lot

Sherwin-Williams advises buying one extra roll to avoid running out and to keep a spare for patching, and checking that every roll has the same run or lot code, since colors can vary between print batches. Farrow & Ball gives the same advice, to add one more roll to your estimate to allow for trimming or mistakes. Its rolls are metric (10 meters by 53 centimeters), so use its drop counts only for its own papers. Order everything at once.

## Common mistakes

- **Ignoring the repeat.** A large repeat can add a roll or more.

- **Counting rolls without checking the package.** A double roll is two singles.

- **Forgetting the spare.** A leftover roll is cheap insurance.

- **Mixing batches.** Lot numbers matter.

- **Skipping the openings.** Doors and windows are not wall.

## What else to buy

Wall prep, primer or sizing, adhesive if the paper is not pre-pasted, a smoothing tool and a sharp blade complete the job. Use the [square footage calculator](../../square-footage-calculator/) for the area of odd walls, and treat all results as planning estimates.

## Frequently asked questions

### How do I calculate how many rolls of wallpaper I need?

Find the wall area by multiplying the room's perimeter by its height, subtract 20 square feet for each door or window, and divide by the usable yield of one single roll for your pattern repeat, then round up. Sherwin-Williams lists yields of 25, 22, 20 and 18 square feet for repeats of 0 to 6, 7 to 12, 13 to 18 and 19 to 23 inches.

### Are wallpaper rolls priced as single or double rolls?

Sherwin-Williams notes that wallpaper is priced by the single roll but is often available only in double or triple rolls, so a count of 10 double rolls is 20 single rolls.

### Should I buy extra wallpaper?

Yes. Sherwin-Williams advises buying one extra roll for mistakes and patching, and making sure all rolls share the same run or lot code.

## Sources and further reading

- [How-To Estimate How Much Wallpaper You Need](https://www.sherwin-williams.com/homeowners/how-to/wallpapering-how-tos/sw-article-dir-howtoestimate) — Sherwin-Williams
- [Calculating Wallpaper Quantities](https://www.farrow-ball.com/how-to-guide/wallpaper/calculating-wallpaper-quantities) — Farrow & Ball
