# How Much Carpet Do You Need?

_Published October 30, 2026_

**In short:** Carpet comes in 12-foot (sometimes 15-foot) rolls and is sold by the square yard, so you pay for the full roll width. A 14x11 foot room (154 square feet) cut from a 12-foot roll takes 19.3 square yards, about 174 square feet, with a trim allowance. Padding covers just the room area.

## Carpet is sold by the square yard from a roll

Broadloom carpet comes off a roll of fixed width. A University of Florida extension bulletin on carpet says carpet in 12-foot widths is most common, though some is available in 15-foot widths. You pay for the full roll width of whatever length you need, so the amount you buy is usually larger than the room.

```
square yards = length bought (ft) x roll width (ft) / 9
```

A square yard is 9 square feet. The [carpet calculator](../../carpet-calculator/) works out the length of roll needed, with a trim allowance on each cut edge, and gives the result in square yards.

## Worked example: a 14 x 11 foot room

The room is 154 square feet. Because the 11 foot width fits inside a 12-foot roll, the room is cut from one piece with the roll running along the 14 foot length. With 3 inches of trim allowance on the cut edges, the calculator buys 19.3 square yards, which is 174 square feet. That is more than the room because you pay for the full 12-foot roll width, including the strip you trim off. On a 15-foot roll the same room would be 19.2 square yards, so a roll that does not fit your room costs more.

## Carpet to buy for common rooms

These use a 12-foot roll and a 3 inch trim allowance:

| Room | Room area | Carpet to buy |
| --- | --- | --- |
| 12 x 12 ft | 144 sq ft | 18.3 sq yd |
| 12 x 15 ft | 180 sq ft | 22.7 sq yd |
| 14 x 11 ft | 154 sq ft | 19.3 sq yd |
| 16 x 13 ft | 208 sq ft | 26.1 sq yd |

A room wider than the roll needs a seam, and the calculator notes that. Seams are common, but where they fall is your installer's decision.

## Why the room area is not enough

The University of Florida bulletin lists the factors that affect yardage: the direction the carpet is installed, where the seams are placed, whether seams are kept to a minimum, and whether the carpet has a pattern repeat and how large the repeat is. It gives a ballpark method, multiplying length by width and adding 10 percent for room irregularities, and calls the result a ballpark figure. This Old House also suggests about 10 percent extra, and says patterned or Berber carpet may need additional material.

## Padding and tack strip

Padding covers the room's area, not the carpet you buy, so the example takes 17.1 square yards of pad. This Old House notes that padding is typically sold by the same square footage as the carpet, though you should confirm with your supplier. Tack strip runs around the perimeter, which is about 50 feet for the example, before subtracting the doorways.

## Stairs

Stairs are measured separately. This Old House says to multiply the tread length by the number of steps, do the same for the risers, add the two totals, and then add 2 feet for error. With the calculator's standard 36 inch stairs, 13 steps add enough carpet to bring the example total to 23.6 square yards.

## A quick cost check

At the calculator's placeholder prices of $22 per square yard for carpet and $5 per square yard for pad, the example room costs about $425 for carpet and $86 for padding before installation. Use your quote's real prices, and ask whether the price includes installation, tack strip, seaming and removal of the old carpet.

## Measure carefully

Measure to the rough doorway opening, and measure into the doorway center rather than only to the wall, because the carpet continues into the opening. Round each measurement up. Give your installer a sketch of the room with the dimensions and ask them to confirm the layout, because the seam placement changes the yardage.

## Common mistakes

- **Buying the room area.** You pay for the full roll width.

- **Forgetting the pattern repeat.** It increases the yardage.

- **Not planning seams.** They affect both the look and the amount.

- **Counting padding as carpet.** Pad covers the room area.

- **Skipping the extra.** The 10 percent allowance covers trimming and irregular corners.

## What else to order

Add padding, tack strip, seaming tape, and transitions for the doorways. Use the [square footage calculator](../../square-footage-calculator/) for L-shaped rooms, and treat these figures as planning estimates.

## Frequently asked questions

### How much carpet do I need for a 14x11 room?

The room is 154 square feet. Cut from a 12-foot roll with 3 inches of trim allowance, it takes 19.3 square yards, or 174 square feet.

### What width does carpet come in?

A University of Florida extension bulletin says carpet in 12-foot widths is most common, and some is available in 15-foot widths.

### How much extra carpet should I order?

The University of Florida bulletin and This Old House both suggest adding about 10 percent for room irregularities, and patterned carpet may need more.

## Sources and further reading

- [What's Underfoot: Carpet Quality and Construction (FCS 3108)](https://ufdcimages.uflib.ufl.edu/IR/00/00/25/90/00001/HE78400a.pdf) — University of Florida IFAS Extension
- [How To Measure for Carpet Replacement](https://www.thisoldhouse.com/flooring/how-to-measure-for-carpet-replacement) — This Old House
