# How Much Concrete Do You Need for Steps?

_Published November 5, 2026_

**In short:** Solid concrete steps are stacked blocks, each as tall as the total rise at that step. Four steps 4 feet wide, with 7 inch risers and 11 inch treads, hold 21.4 cubic feet, or 0.79 cubic yards. With 10 percent extra that is 0.87 cubic yards, about 40 bags of 80 pounds. The 2015 IRC allows an 8 1/4 inch riser and a 9 inch tread.

## Solid steps are stacked slabs

A solid concrete step is a block of concrete as wide as the steps, as deep as the tread, and as tall as the rise above the ground at that step. Each step down the flight is one riser higher than the next, so the volume adds up quickly. The [concrete calculator](../../concrete-calculator/) has a stairs option that takes the number of steps, the width, the riser height and the tread depth, and it counts every step as solid from the ground up.

```
volume = width x tread depth x (rise of step 1 + rise of step 2 + ... )
for n steps of riser R: rise total = R x (1 + 2 + ... + n)
```

## Worked example: four steps, 4 feet wide

With a 7 inch riser and an 11 inch tread, the four steps are 7, 14, 21 and 28 inches high at their fronts, which adds to 70 inches of riser. Multiply that by the 11 inch tread and the 48 inch width and divide by 1,728 cubic inches per cubic foot, and you get 21.4 cubic feet, or 0.79 cubic yards. With 10 percent extra it is 23.5 cubic feet and 0.87 cubic yards, which is 40 bags of 80-pound mix. The solid steps weigh about 3,208 pounds. At the calculator's placeholder ready-mix price of $165 per cubic yard, the pour is about $144 before delivery and short-load fees.

## Concrete for different step counts

All rows use a 7 inch riser, an 11 inch tread, a 4 foot width and no waste:

| Steps | Total rise | Cubic yards | Weight | 80 lb bags |
| --- | --- | --- | --- | --- |
| 2 steps | 14 in | 0.24 | 962 lb | 11 |
| 3 steps | 21 in | 0.47 | 1,925 lb | 22 |
| 4 steps | 28 in | 0.79 | 3,208 lb | 36 |
| 5 steps | 35 in | 1.19 | 4,812 lb | 54 |

Total rise grows with each step, and so does the concrete. A 6 foot wide flight of the same four steps takes 1.19 cubic yards, 50 percent more than the 4 foot wide flight.

## Rise and run: what the code says

Step dimensions are set by the building code, and they change between editions. The 2015 International Residential Code, as quoted in a Connecticut town's handout, sets a maximum riser height of 8 1/4 inches and a minimum tread depth of 9 inches, with the greatest riser in a flight no more than 3/8 inch taller than the smallest. Later editions tightened this: the 2018 and 2021 IRC use a 7 3/4 inch maximum riser and a 10 inch minimum tread. Check the edition your jurisdiction has adopted, because state amendments change the numbers. The handout also lists a minimum stairway width of 36 inches and says a flight cannot rise more than 147 inches between floor levels or landings.

Those limits change the concrete. Four steps with 7.75 inch risers and 10 inch treads take 0.80 cubic yards, while four steps with 8.25 inch risers and 9 inch treads take 0.76. A lower, deeper step is easier to climb and uses a little more concrete.

## Landings and guards

A landing at the top and bottom of the stairs is part of the job. The 2015 IRC excerpt requires guards on open sides of walking surfaces, including stairs and landings, that are more than 30 inches above the floor or grade below. A 4 x 4 foot landing 4 inches thick adds 0.20 cubic yards, or 9 bags of 80-pound mix. Ask your building department about the required landing size and whether you need a permit and a footing.

## Steps need a foundation

Solid steps are heavy and sit on the soil, so a compacted gravel base and, where frost matters, a footing are common. The footing depth is a local rule. If the steps are attached to a house or deck, the connection is a structural detail, so ask an engineer or your building department. Control joints and reinforcement are part of the plan too.

## Common mistakes

- **Ignoring the code editions.** Riser and tread limits differ between 2015 and later editions.

- **Uneven risers.** The greatest riser must not exceed the smallest by more than 3/8 inch.

- **Counting only the top step.** Each step is solid from the ground.

- **Forgetting the landing.** It is its own slab.

- **Skipping the extra.** Forms are never perfectly tight, so add 10 percent.

## What else to order

Add lumber for the forms, gravel for the base (size it with the [gravel calculator](../../gravel-calculator/)), rebar if your plan calls for it, and railings. Treat all quantities as planning estimates.

## Frequently asked questions

### How much concrete do I need for 4 concrete steps?

Four steps 4 feet wide with 7 inch risers and 11 inch treads need 0.79 cubic yards, or 0.87 with 10 percent extra. That is about 40 bags of 80-pound mix.

### How high can the risers on steps be?

It depends on the code edition. The 2015 IRC sets a maximum riser of 8 1/4 inches and a minimum tread of 9 inches, and the 2018 and 2021 editions use 7 3/4 inches and 10 inches. The greatest riser in a flight cannot exceed the smallest by more than 3/8 inch.

### Do concrete steps need a landing?

Yes. The IRC requires a floor or landing at the top and bottom of each stairway. A 4x4 foot landing 4 inches thick takes about 0.20 cubic yards.

## Sources and further reading

- [Residential Stairways and Ramps (2015 IRC code excerpts)](https://www.essexct.gov/DocumentCenter/View/449/Residential-Stairways-and-Ramps-2015-Irc-Handout-PDF) — Town of Essex, Connecticut
- [2021 International Residential Code: R311.7.5.1 Risers](https://codes.iccsafe.org/s/IRC2021P3/chapter-3-building-planning/IRC2021P3-Pt03-Ch03-SecR311.7.5.1) — International Code Council
