# How Much Does a Cubic Yard of Concrete Weigh?

_Published November 12, 2026_

**In short:** A cubic yard of normal-weight concrete weighs about 4,000 pounds, or 2 tons. An extension bulletin lists concrete at 150 pounds per cubic foot, and 150 x 27 cubic feet is 4,050 pounds. A 10x10 foot slab 4 inches thick is 1.24 cubic yards and weighs about 5,000 pounds.

## The short answer: about 4,000 pounds, or 2 tons

A cubic yard of normal-weight concrete weighs about 4,000 pounds. An extension bulletin on the weights of building materials lists concrete at 150 pounds per cubic foot, and one cubic yard is 27 cubic feet, so 150 x 27 is 4,050 pounds. The [concrete calculator](../../concrete-calculator/) uses the same 4,050 pounds per yard for its weight result, and the yards to tons calculator uses 2.0 tons for concrete, which is 2.0 tons for one yard.

```
weight (lb) = cubic yards x 27 x 150
```

## Weight of common slabs

These weights are for the concrete only, with no waste, using 4,050 pounds per cubic yard:

| Slab | Cubic yards | Weight |
| --- | --- | --- |
| 4 x 4 ft, 4 in | 0.20 | 800 lb |
| 10 x 10 ft, 4 in | 1.24 | 5,000 lb |
| 12 x 20 ft, 4 in | 2.96 | 12,000 lb |
| 20 x 20 ft, 6 in | 7.41 | 30,000 lb |

## Worked example: a 10 x 10 foot slab

A 10 x 10 foot slab 4 inches thick holds 33.3 cubic feet, or 1.24 cubic yards, which weighs about 5,000 pounds. That is roughly 2.5 tons of concrete in a small patio. With 80-pound bags of mix at 0.60 cubic feet each, the same slab takes 56 bags.

## Why bagged mix does not add up to the same weight

A dry 80-pound bag yields 0.60 cubic feet of concrete once water is added. So 45 bags, about a cubic yard, weigh 3,600 pounds dry, below the 4,050 pounds of finished concrete. The difference is mostly the mixing water, plus variation between products. Use the weight of the finished concrete when you are thinking about loads on a driveway, a deck or a truck, and the bag weight when you are lifting.

## Ready-mix trucks

Concrete Network's ready-mix guide describes a typical truck mixer as holding 9 to 11 cubic yards. At 4,050 pounds per cubic yard that is about 36,500 to 44,600 pounds of concrete, before the truck itself. That is why trucks can damage soft driveways and lawns, and why delivery drivers ask about access. Tell the driver about any septic tanks, weak pavement or tight turns.

## Pours and curing

Fresh concrete is a heavy, wet material that you place and finish quickly, so plan helpers, tools and the washout of equipment before the truck arrives. Forms must be strong enough to hold the weight of the pour, and a thick pour presses hard on its forms, so brace them well and keep people clear of the sides.

## Concrete varies

Normal-weight concrete is not one fixed density. Aggregate type, air content and the mix design change it. The 150 pounds per cubic foot figure is a planning value, and lightweight and heavyweight concretes are different products. For structural work, use the weight on the mix design or the batch ticket.

## Loads on the ground and on structures

A slab's weight matters for what it sits on. A 4 inch slab adds about 50 pounds per square foot, which is 4/12 of a foot times 150 pounds per cubic foot. On a deck, a roof or a suspended slab, that load must be designed for, so ask an engineer. On the ground, a compacted base spreads the load.

## Weights for common pour sizes

| Pour | Weight (lb) | Weight (tons) |
| --- | --- | --- |
| 1 cu yd | 4,050 | 2.0 |
| 2 cu yd | 8,100 | 4.0 |
| 5 cu yd | 20,250 | 10.1 |
| 10 cu yd | 40,500 | 20.2 |

## From volume to weight in four steps

First, find the volume of the pour in cubic yards with the concrete calculator. Second, multiply by 27 to get cubic feet and by about 150 pounds per cubic foot, or just multiply the yards by 4,050 pounds. Third, divide by 2,000 for tons. Fourth, think about what carries the load, whether that is the ground under the slab, the driveway the truck drives on or the vehicle you use to haul bagged mix.

## Common mistakes

- **Treating concrete like gravel.** A yard is about 2 tons, more than a yard of gravel.

- **Adding up bag weight.** Dry mix weighs less than finished concrete.

- **Ignoring truck weight.** A loaded mixer is very heavy.

- **Using one density for everything.** Lightweight mixes differ.

- **Forgetting reinforcement.** Rebar and mesh add a little weight.

## What else to consider

Size the pour first with the concrete calculator, then think about weight and access. Treat all figures as planning estimates.

## Frequently asked questions

### How much does a cubic yard of concrete weigh?

About 4,000 pounds. At 150 pounds per cubic foot, which is the figure in an extension weights bulletin, a cubic yard of 27 cubic feet weighs 4,050 pounds, or about 2 tons.

### How much does a 10x10 slab weigh?

At 4 inches thick it is 1.24 cubic yards, which weighs about 5,000 pounds, or roughly 2.5 tons.

### How much concrete does a truck carry?

Concrete Network says a typical truck mixer holds 9 to 11 cubic yards, which at 4,050 pounds per yard is about 36,500 to 44,600 pounds of concrete.

## Sources and further reading

- [Weights of Building Materials, Agricultural Commodities, and Floor Loads for Buildings (H-20)](https://people.ohio.edu/ziff/hcia350/Weights%20and%20Floor%20Loads.pdf) — Extension bulletin H-20 (Ohio University copy)
- [Ready Mix Concrete Delivery: How to Order Concrete](https://concretenetwork.com/ready-mix-buyers-guide) — Concrete Network
