# How Much Flooring Do You Need?

_Published October 25, 2026_

**In short:** Multiply length by width, add waste, and divide by the coverage per box. A 16x12 foot room is 192 square feet, and with 7 percent waste for a straight lay it needs 205 square feet, or 11 boxes of 20 square feet. Diagonal layouts need 10 to 15 percent, and manufacturers give their own waste factors.

## Area, then waste, then boxes

Flooring is bought by the box, and every box covers a fixed number of square feet. The calculation has three steps: find the room's area, add an allowance for waste, and divide by the coverage per box, rounding up. The [flooring calculator](../../flooring-calculator/) does all three.

```
boxes = room area x (1 + waste %) / coverage per box, rounded up
```

## How much waste to add

The answer depends on the product and the layout. A Lowe's and Mullican guide to hardwood footage says you should typically add 5 percent, which lets the installer cull boards with manufacturing defects or character that you do not want, adds that character and builder grades may need a higher percentage, and says a diagonal installation should add 10 to 15 percent for the larger cuts. Mannington says its products call for a waste factor of 5 to 15 percent depending on the product, to cover material that arrives damaged and to leave a supply for future repairs. Always confirm the figure for the product you buy.

## Worked example: a 16 x 12 foot room

The room is 192 square feet. With a typical straight lay and 7 percent waste, you need 205 square feet, and at 20 square feet per box that is 11 boxes. You buy 220 square feet, and the leftover is your spare for repairs. With a diagonal layout and 15 percent waste the same room needs 12 boxes.

## Boxes by layout

| Layout | Waste | Area to cover | Boxes of 20 sq ft |
| --- | --- | --- | --- |
| Straight lay, large simple room | 5% | 202 sq ft | 11 |
| Straight lay, typical room | 7% | 205 sq ft | 11 |
| Rooms with angles or closets | 10% | 211 sq ft | 11 |
| Diagonal | 15% | 221 sq ft | 12 |
| Herringbone or chevron | 20% | 230 sq ft | 12 |

## Box size changes the count

Coverage per box varies by product, so check the carton. The 16 x 12 foot room with 7 percent waste needs a different number of boxes depending on the box:

| Box coverage | Boxes | Flooring to buy |
| --- | --- | --- |
| 15 sq ft per box | 14 | 210 sq ft |
| 20 sq ft per box | 11 | 220 sq ft |
| 24 sq ft per box | 9 | 216 sq ft |

Because you buy whole boxes, a larger box can leave you with more spare flooring than a small one. Compare the total square feet you will take home, not just the box count.

## Closets, halls and other rooms

Add the area of every space getting the same floor before you apply the waste. A 24 square foot closet makes the example 216 square feet and, with 10 percent for a room with angles, 12 boxes. Measure each space in feet, and treat doorways as part of the floor.

## A quick cost check

At the calculator's placeholder price of $3.50 per square foot, the 220 square feet for the example room is about $770 in material. Replace that with your product's real price, and remember to price the underlayment, trim and installation separately.

## Underlayment

Some floors need an underlayment. The calculator counts rolls of 100 square feet, so the example room takes 2 roll. Check the flooring maker's instructions on whether you need underlayment and what kind, because requirements vary.

## Measure carefully

Measure the room at its longest and widest points, and split an L-shaped or alcoved room into rectangles, then add their areas. Round each measurement up to the next inch or half foot rather than down. A small error in the measurement repeats across the whole floor, and it is cheaper to double-check with a tape than to reorder a single box later.

## Keep a box for later

Mannington recommends keeping leftover material for future repairs, and Lowe's guide notes that the extra lets an installer remove defective pieces. Buy all your flooring in one order, so the boxes share a production run and the color and gloss match. Then store the spare boxes flat in a dry place.

## Common mistakes

- **Ordering the exact area.** Cuts and defects always use some material.

- **Using the same waste for every layout.** A diagonal pattern needs more than a straight lay.

- **Forgetting closets and halls.** They are part of the floor.

- **Not rounding up to boxes.** You cannot buy half a box.

- **Buying in two orders.** Different runs may not match.

## What else to order

Add underlayment where required, transition strips, baseboard or quarter-round, and adhesive or fasteners for your type of flooring. Use the [square footage calculator](../../square-footage-calculator/) for L-shaped rooms, and treat all numbers here as planning estimates.

## Frequently asked questions

### How much extra flooring should I buy?

A Lowe's and Mullican hardwood guide says typically add 5 percent, and 10 to 15 percent for diagonal installs. Mannington says its products call for 5 to 15 percent, depending on the product.

### How many boxes of flooring do I need for a 12x16 room?

The room is 192 square feet. With 7 percent waste that is 205 square feet, so 11 boxes of 20 square feet.

### Should I keep extra flooring?

Yes. Mannington recommends keeping leftover material for future repairs, and buying it all in one order keeps the color and run consistent.

## Sources and further reading

- [How to Calculate the Correct Footage When Purchasing Hardwood Flooring](https://pdf.lowes.com/productdocuments/3f70b1c9-8ab7-4125-a2e7-9a3d080d2861/08130541.pdf) — Lowe's / Mullican Flooring
- [What to Expect From Your Floor Installation](https://www.mannington.com/residential/blog/2022/10/what-to-expect-from-your-floor-installation) — Mannington
