# How to Measure the Square Footage of a Yard

_Published October 21, 2026_

**In short:** Split the yard into rectangles, triangles and circles, find each area and add them up. A 50x30 foot rectangle is 1,500 square feet, and an L-shaped yard of 40x30 plus 20x15 feet is 1,500. Subtract beds, patios and trees before ordering sod, seed or fertilizer.

## Break the yard into simple shapes

You do not need a surveyor to find the area of a lawn. The University of California's guide to measuring lawn square footage says to make calculations by sections for an unusual shape and add them together for a final total. A Prince William County, Virginia, handout adapted from a Virginia Department of Conservation and Recreation guide agrees: divide the lawn into smaller sections with familiar shapes like squares, rectangles, triangles and circles, and use the formula for each.

## The formulas you need

- **Rectangle or square:** length x width.

- **Triangle:** half the base times the height.

- **Circle:** pi (3.14) x radius x radius.

- **Half circle:** half of the circle formula.

Measure everything in feet, and measure at right angles for a triangle's height. The [square footage calculator](../../square-footage-calculator/) has shapes for each of these.

## Worked examples

| Shape | Measurements | Area (sq ft) |
| --- | --- | --- |
| Rectangle | 50 x 30 ft | 1,500 |
| Triangle | base 20 ft, height 12 ft | 120 |
| Circle | 16 ft across (8 ft radius) | 201 |
| Two rectangles (L-shape) | 40 x 30 plus 20 x 15 ft | 1,500 |

The circle works out to 201 square feet because the calculator uses pi's full value. With 3.14 you get 200.96, which is the same to the nearest square foot.

## An L-shaped or multi-part yard

For an L-shape, split it into two rectangles and add them. A 40 x 30 foot main lawn plus a 20 x 15 foot side lawn is 1,200 + 300 = 1,500 square feet. That is 166.7 square yards or 0.034 acre. The calculator's several-rectangles option takes up to four sections.

## Start from the lot and subtract

There is a second way. The same handout suggests taking the total lot size and subtracting the areas that are not lawn. In its example, a 12,500 square foot lot loses a 1,144 square foot house, a 144 square foot deck, an 80 square foot sidewalk, a 400 square foot drive and a 375 square foot garden, a total of 2,143 square feet, leaving 10,357 square feet of lawn. This works well when you know the lot size from a plat or a county record.

## Irregular curves: the strip method

For a bed or lawn with wavy edges, the University of California guide uses strips. Measure along one axis of the area, and every 10 feet along that line measure the length at right angles. Add up the lengths and multiply by 10. For example, lengths of 40, 60 and 32 feet give (40 + 60 + 32) x 10 = 1,320 square feet. Shorter intervals give a closer answer when the edge curves a lot.

## Subtract what is not lawn

Take out beds, trees, patios and anything else you will not cover. A 10 x 8 foot patio and a 6 foot round tree bed remove about 80 plus 28 square feet, so the example L-shaped yard drops from 1,500 to roughly 1,392 square feet. Do this before you order sod, seed or fertilizer, because you pay by the square foot for each.

## Converting the result

Seed, fertilizer and sod are often priced per 1,000 square feet or per square foot, while some contractors quote square yards. A square yard is 9 square feet, so 1,000 square feet is 111.1 square yards. An acre is 43,560 square feet, which the calculator shows as 1.00 acre for that area. Keep the unit the same as the one on the product label before you multiply.

## Common mistakes

- **Mixing units.** Measure all sides in feet before you multiply. A tape in inches needs dividing by 12.

- **Using the diameter as the radius.** The circle formula needs half the width.

- **Forgetting to subtract.** Beds and patios are not lawn.

- **Measuring a slope along the ground.** Measure on a horizontal plane where you can, and add a margin for steep areas.

- **Estimating by eye.** Even a rough tape or a garden hose of known length beats pacing.

## What to do with the number

Once you have the area, convert it to what you are buying. The [sod calculator](../../sod-calculator/) and the [grass seed calculator](../../grass-seed-calculator/) take the area directly, and the [topsoil calculator](../../topsoil-calculator/) adds depth. Round up a little and treat the results as planning estimates.

## Frequently asked questions

### How do I measure the square footage of an irregular yard?

Divide it into simple shapes and add the areas, or use the strip method from the University of California: measure the length every 10 feet along one axis, add the lengths and multiply by 10.

### How do I find the area of a circle in feet?

Multiply 3.14 by the radius squared. A circle 16 feet across has an 8 foot radius, so its area is about 201 square feet.

### How many square feet are in an acre?

43,560 square feet. The square footage calculator shows acres for any area you enter.

## Sources and further reading

- [How to Measure Lawn Square Footage](https://ccfruitandnuts.ucanr.edu/sites/default/files/2012-03/138937.pdf) — University of California Agriculture and Natural Resources
- [How to Measure Your Lawn Area](https://www.pwcva.gov/assets/documents/vce/measuring%20lawn%20area.pdf) — Prince William County, Virginia (adapted from Virginia DCR)
