How Much Does a Cubic Yard of Topsoil Weigh?

In short

A cubic yard of topsoil weighs roughly 2,200 to 2,500 pounds, or 1.1 to 1.25 tons. The EPA lists loose sandy loam at about 2,392 pounds per cubic yard, and an extension bulletin lists soil at 2,500. The topsoil calculator uses 1.1 tons and notes a range of 1.0 to 1.3. A 50x20 foot lawn at 4 inches needs 12.3 yards.

The short answer: about 1.1 to 1.25 tons

A cubic yard of topsoil weighs about 2,200 to 2,500 pounds. The U.S. EPA's table lists loose sandy loam at about 2,392 pounds per cubic yard, and an extension bulletin on building material weights lists soil at 2,500 pounds per cubic yard. The topsoil calculator uses a lower planning figure of 1.1 tons per cubic yard, and its note says topsoil weighs about 1.0 to 1.3 tons depending on moisture and organic content.

tons = cubic yards x tons per cubic yard

Why published figures differ

Topsoil is a mix of sand, silt, clay and organic matter, and it holds a varying amount of water. Screened, compost-rich loam is lighter than a heavy clay loam or a wet load. That is why one table says 2,392 pounds for sandy loam and another says 2,500 for soil, and why the calculator's planning value is lower. Ask your supplier for the weight of the product you are buying.

One cubic yard at three densities

At 1.1 tons per yard the weight is 1.10 tons, at 1.2 it is 1.20, and at 1.25 it is 1.25. Over a large order the difference is significant.

Worked example: 1,000 square feet of lawn

A 50 x 20 foot lawn at 4 inches deep needs 12.3 cubic yards with no settling allowance. The calculator gives 13.6 tons at its default density. At 1.25 tons per cubic yard, the same 12.3 yards would weigh 15.4 tons. Planning for the heavier figure avoids being caught short on a weight-limited truck.

Worked example: a garden bed

A 10 x 4 foot bed filled 6 inches deep takes 0.74 cubic yards, which is about 0.81 tons by the calculator. That is a pickup load by volume, but it is also close to the limit by weight.

How much can a pickup carry?

With a payload rating of 1,500 pounds, which is 0.75 tons, a pickup can carry about 0.68 cubic yards of topsoil at 1.1 tons per yard, or 0.60 at 1.25. A full bed is often more than that by weight. Check the rating in the owner's manual or on the door-jamb sticker, and make several trips or order a delivery for anything more.

Where the load goes

Topsoil is usually tipped in a pile on a driveway or at the curb, and then moved by wheelbarrow. Ask the driver to place it where the truck can safely reach, away from septic tanks, soft ground and overhead wires.

Wet topsoil

Rain adds weight. The calculators' notes say that moisture changes real weight, and a wet load can come in above your estimate. If a supplier sells by the ton, you pay for that water. If you buy by the yard, the weight matters only for hauling.

Weights for common order sizes

OrderTons at 1.1Tons at 1.25
1 cu yd1.11.2
2 cu yd2.22.5
5 cu yd5.56.2
10 cu yd11.012.5
20 cu yd22.025.0

From volume to weight in four steps

First, find the volume of the job in cubic yards with a calculator or the length x width x depth formula. Second, choose a density for topsoil: use the supplier's figure if you can get it, and otherwise a planning value from the tables above. Third, multiply the cubic yards by tons per cubic yard. Fourth, compare the result with what your vehicle or trailer can legally and safely carry. For example, 10 cubic yards at 1.1 tons per yard comes to 11.0 tons.

Delivery tickets and scales

Many suppliers weigh the truck on a scale before and after loading, and the ticket shows the net tons. If you ordered by volume, ask how they convert, and compare the ticket with your estimate. A big gap is a reason to ask about moisture or to check that the load is the size you ordered.

Common mistakes

What else to consider

Use the topsoil calculator to find the volume for your lawn or bed, then convert to tons with the yards to tons calculator using your supplier's density.

Calculators for this guide

Frequently asked questions

How many tons are in a yard of topsoil?

About 1.1 to 1.25. The topsoil calculator uses 1.1 and notes a range of 1.0 to 1.3 depending on moisture and organic content. The EPA lists loose sandy loam at 2,392 pounds per yard.

How much does topsoil for 1,000 square feet weigh?

At 4 inches deep it takes 12.3 cubic yards, which weighs about 13.6 tons at 1.1 tons per yard and 15.4 tons at 1.25.

Does wet topsoil weigh more?

Yes. Water adds weight, so a wet load can weigh more than an estimate based on dry planning values.

Sources and further reading

More guides

Estimates only. Always confirm quantities with your supplier or a qualified contractor before ordering, and add extra for waste and site conditions.