How Much Baseboard and Trim Do You Need?

In short

Baseboard is the room perimeter minus the doorways, plus an allowance for corners and mistakes. A 12x12 foot room has a 48 foot perimeter and 45 feet of baseboard with one 3 foot doorway, which is 50 feet or 7 pieces of 8 feet with 10 percent waste. This Old House advises 10 percent extra and Bob Vila about 20 percent.

Baseboard is the room perimeter minus the doorways

Baseboard runs along the bottom of every wall, so you need the room's perimeter minus the doorways and any other openings. Bob Vila's trim guide describes it as measuring the length of each wall from corner to corner, subtracting openings for doors or closets, and adding the measurements together. For a plain rectangle, the perimeter is twice the length plus twice the width.

baseboard (ft) = 2 x (length + width) - doorway widths
order = baseboard x (1 + waste), divided into stock lengths

How much extra to buy

Corners and joints use up trim, so you add an allowance, and the advice differs. This Old House says to add 10 percent for waste and mistakes. Bob Vila recommends about 20 percent extra for mistakes, offcuts and overlapping joints. The baseboard calculator defaults to 10 percent. Use 10 percent for a simple room with square corners, and more for a room with many corners or if you are new to cutting miters and copes.

Worked example: a 12 x 12 foot room

The perimeter is 48 feet. With one 3 foot doorway, the baseboard is 45 feet, and with 10 percent waste it comes to 50 feet, which is 7 pieces of 8 feet. With 12 foot lengths it is 5 pieces. At 20 percent waste, the total is 54.0 feet and 7 pieces of 8 feet. Bob Vila notes that stores sell baseboard and crown molding in 8 foot and 12 foot lengths, and that an average 16 to 20 foot living room wall can be trimmed with two pieces.

Trim for common rooms

These use 8 foot stock, 3 foot doorways and 10 percent waste.

RoomPerimeterBaseboardWith waste8 ft pieces
10 x 10 ft40 ft37 ft41 ft6
12 x 12 ft48 ft45 ft50 ft7
14 x 12 ft52 ft46 ft51 ft7
16 x 20 ft72 ft66 ft73 ft10

Corners and joints

Corners take extra length. This Old House says to round each wall up to the nearest whole-foot dimension and to add a few inches at outside corners, so there is room for the miter cuts. Bob Vila says coped joints are ideal at inside corners, although miters can also be used, and outside corners are formed by cutting two boards at 45 degrees. A scarf joint, made by cutting overlapping 45-degree angles, joins two shorter boards into one long run on a wall longer than your stock, and it needs a nail through it. Long walls therefore use more length than the straight sum of the walls, which is one reason for the waste allowance.

Shoe molding, quarter round and crown

If you add shoe molding or quarter round along the floor, it runs the same length as the baseboard, which means 7 more pieces in the example. Crown molding runs along the ceiling and is not reduced for doorways, so the 12 x 12 foot room needs 7 pieces of 8 feet and 4 inside corners. Each one is a separate item on the shopping list.

Several identical rooms

For repeated rooms, use the room count in the calculator rather than multiplying by hand: four rooms like the example need 25 pieces of 8 foot baseboard.

Measuring tips

Sketch the room and number each wall, noting doors and built-in fixtures, as This Old House suggests. Measure each wall from corner to corner and account for any wall irregularities. Rounding each wall up to the next whole foot gives a small built-in cushion, and walking the room with the sketch before you buy helps you spot a wall you forgot.

A quick cost check

At the calculator's placeholder price of $1.60 per linear foot, the baseboard for the example costs about $79. Replace it with your own price, and add paint or stain, caulk, nails and wood filler.

Common mistakes

What else to buy

Add finishing nails or adhesive, caulk, wood filler and primer. For the paint on the trim, see the paint calculator, which includes an option for trim.

Calculators for this guide

Frequently asked questions

How much baseboard do I need for a 12x12 room?

The perimeter is 48 feet. With one 3 foot doorway that is 45 feet, and with 10 percent waste about 50 feet, or 7 pieces of 8 foot baseboard.

How much extra baseboard should I buy?

This Old House says to add 10 percent for waste and mistakes. Bob Vila recommends about 20 percent extra for mistakes, offcuts and overlapping joints.

Do I subtract doorways for baseboard?

Yes. Subtract the width of each doorway and other openings from the perimeter. Crown molding runs across doorways, so you do not subtract them for crown.

Sources and further reading

More guides

Estimates only. Always confirm quantities with your supplier or a qualified contractor before ordering, and add extra for waste and site conditions.