How Much Lumber Do You Need for a Deck?
For a 12x16 foot deck with 5.5 inch boards and a 1/8 inch gap, you need 26 rows of decking, about 29 boards of 16 feet with 10 percent waste, and 13 joists at 16 inches on center. The American Wood Council guide specifies decking spaced about 1/8 inch apart and fastened to each joist with two screws or nails.
What goes into a deck material list
A deck is a stack of parts: footings and posts in the ground, beams on the posts, joists across the beams, and boards on top. The deck calculator counts the decking boards, the joists, the footing posts and the fasteners from the deck's length and width. This guide explains each count so you can check it against your plan.
Decking boards: rows, then pieces
The boards run in one direction. Divide the deck width by the width of one board plus the gap to get the number of rows. For a deck 12 feet wide (the direction across the boards) with 5.5 inch boards and a 1/8 inch gap, that is 26 rows. The American Wood Council's deck guide says to space decking boards approximately 1/8 inch apart, which is the calculator's default gap.
boards = rows x deck length / board length, plus waste
For a 16 foot long deck, 16 foot boards run the full length with no joint, so 26 rows needs 29 boards with 10 percent waste, or 458 linear feet of decking in total. A 192 square foot deck (192 square feet by the calculator) is a common size.
Deck sizes at a glance
All of these use 16 foot boards, 5.5 inch boards with a 1/8 inch gap, joists at 16 inches on center and 10 percent waste.
| Deck | Area (sq ft) | Board rows | 16 ft boards | Joists |
|---|---|---|---|---|
| 10 x 10 ft | 100 | 22 | 25 | 9 |
| 12 x 12 ft | 144 | 26 | 29 | 10 |
| 16 x 12 ft | 192 | 26 | 29 | 13 |
| 20 x 14 ft | 280 | 30 | 66 | 16 |
Board length changes the count
The 16 x 12 foot deck needs 58 boards if they are 8 feet long, 58 if 12 feet, 29 if 16 feet and 29 if 20 feet. Longer boards waste less at the ends and have fewer butt joints, but they cost more per piece and are harder to carry. Always check which lengths your supplier stocks. Board width matters as well: using 3.5 inch boards (2x4) instead raises the rows from 26 to 40.
Joists: spacing sets the count
Joists run across the deck's width, in the other direction from the boards. The AWC guide's joist tables are organized for spacings of 12, 16 and 24 inches on center, and Penn State's summary of the 2021 International Residential Code notes that the maximum joist spacing is limited by the decking material. For the example deck, joists at 16 inches on center number 13; at 12 inches there are 17, and at 24 inches there are 9. Some decking products require closer spacing than others, so follow the decking maker's limit.
Diagonal boards
The AWC guide allows decking at an angle from perpendicular to the joists to 45 degrees to the joists, and requires each decking piece to bear on at least 3 joists. A diagonal pattern wastes more material, and the calculator suggests 15 percent for it, which raises the example to 30 16 foot boards.
Footings, posts and fasteners
The calculator assumes two beams with posts no more than 8 feet apart, which gives 6 footing posts for the example and about 12 bags of 80-pound concrete. The AWC guide says all footings must bear on undisturbed soil at least 12 inches below the surface, or below the frost line, whichever is deeper, and to contact your building department for the local frost depth. Fasteners are counted at two per joist crossing, which matches the AWC rule of two 8d threaded nails or two No. 8 screws at each joist. That is about 676 screws for the example. A real deck also needs a ledger or second beam, flashing, joist hangers and rim joists, so use the calculator for the decking and framing counts, and your plan for everything else.
A quick cost check
At the calculator's placeholder price of $28 per board, the 29 boards come to $812. That excludes framing lumber, hardware and concrete, and the price varies a lot between treated lumber, cedar and composite, so substitute your own prices.
Common mistakes
- Forgetting the gap. It changes the number of rows.
- Using the wrong direction. Boards run across the joists.
- Cutting footings too shallow. Go below the frost line.
- Skipping the permit check. Decks are structural and are usually inspected.
- Ordering short boards for a long deck. Extra joints waste material.
What else to order
You will also need concrete for the footings (size it with the post hole concrete calculator), post brackets, joist hangers, flashing, railings and stairs. Check the plan against local code and permit requirements before you buy.
Calculators for this guide
Frequently asked questions
How many deck boards do I need for a 12x16 deck?
With 5.5 inch boards and a 1/8 inch gap, the deck has 26 rows. Using 16 foot boards with 10 percent waste, that is 29 boards.
How far apart should deck joists be?
The AWC deck guide has joist span tables for 12, 16 and 24 inches on center, and the maximum spacing depends on the decking material. At 16 inches on center the 12x16 deck needs 13 joists.
How far apart should decking boards be?
The AWC Prescriptive Residential Wood Deck Construction Guide says to space decking boards approximately 1/8 inch apart. Composite products have their own gap requirements, so follow the manufacturer.
Sources and further reading
- Prescriptive Residential Wood Deck Construction Guide (DCA 6) — American Wood Council
- Decked Out: A Dive into the Updated 2021 IRC Residential Deck Code Provisions — Penn State Pennsylvania Housing Research Center
More guides
Estimates only. Always confirm quantities with your supplier or a qualified contractor before ordering, and add extra for waste and site conditions.