How Much Topsoil Do You Need for a Lawn?
For a new lawn, extension guides call for at least 4 inches of topsoil, and 6 inches or more is better. A 2,000 sq ft lawn (50x40 ft) needs 24.7 cubic yards at 4 inches, or 27.2 with 10 percent for settling, roughly 29.9 tons. Multiply area by depth in feet and divide by 27.
How deep should the topsoil be?
Grass needs a soil layer to root in. New Mexico State University Extension's turfgrass guide calls 4 inches the absolute minimum soil depth for a lawn, and recommends 6 inches or more for deep root penetration. University of Nebraska-Lincoln Extension says that when you have to regrade, you stockpile the topsoil, grade the subsoil, loosen it, and spread the topsoil back to a minimum depth of 4 inches. That 4 inch figure is the calculator's new-lawn setting, and 6 inches is the garden-bed setting.
The formula
order = cubic yards x (1 + settling allowance)
The topsoil calculator adds a 10 percent settling allowance by default and converts the volume to tons using about 1.1 tons per cubic yard. That weight is a planning figure, because topsoil weighs more when wet. The calculator's own note says it runs from about 1.0 to 1.3 tons per cubic yard depending on moisture and organic content.
Worked example: a 50 x 40 foot lawn
A lawn that is 50 feet by 40 feet is 2,000 square feet. At 4 inches deep, that is 24.7 cubic yards, and with 10 percent for settling the order is 27.2 cubic yards. In cubic feet that is 733, which would be 489 bags of 1.5 cubic feet, so for a lawn this size you will want bulk delivery. The weight is about 29.9 tons. A 6 inch layer on the same lawn takes 40.7 cubic yards.
Topsoil for different lawn jobs
The same 2,000 square foot lawn needs very different amounts depending on the job. The depths below are the calculator's presets, apart from the 4 inch minimum, which follows the extension guidance above.
| Job | Depth | Cubic yards | Tons |
|---|---|---|---|
| Top-dressing before overseeding | 0.5 in | 3.4 | 3.7 |
| Fixing low spots | 1.5 in | 10.2 | 11.2 |
| New lawn, minimum depth | 4 in | 27.2 | 29.9 |
| Garden bed | 6 in | 40.7 | 44.8 |
Spread it or till it in?
UNL's guide for sod and seed describes working the soil to a depth of 4 to 6 inches with a tiller, mixing in any fertilizer and amendments, and taking a soil sample first to tell you what the soil needs. It also says to rototill the subsoil to relieve compaction before spreading the topsoil back. Check what the existing soil already provides before you buy a pile of topsoil.
A rule of thumb per 1,000 square feet
Every 1,000 square feet of lawn needs about 12.3 cubic yards of topsoil at 4 inches deep, and 18.5 cubic yards at 6 inches, before any settling allowance. If you remember the 4 inch figure, you can scale it by area in your head: a 3,000 square foot lawn takes about three times as much, and each extra inch of depth adds roughly a quarter more. The calculator does the exact math, but the shortcut is useful for checking a quote.
What kind of topsoil to buy
NMSU Extension says loams and sandy loams with a pH of 6.0 to 7.0 are the very best soils for producing a beautiful lawn, and that few properties have that ideal soil, so modifying the soil or adding topsoil may be necessary. It advises having the existing soil tested and consulting your local county Extension agent about its suitability and about preplant fertilization. Ask the supplier what the topsoil is made from, and look at it before it is delivered. Screened loam is a better choice than a heavy clay fill or pure sand.
Common mistakes
- Skimping on depth. Below the 4 inch minimum, grass roots stay shallow and the lawn burns out in dry spells.
- Forgetting settling. Fresh topsoil compacts, so add the 10 percent.
- Measuring in the wrong unit. Convert the depth from inches to feet before you multiply, or use the calculator.
- Ordering by the ton without checking the weight. Ask the supplier if they sell by the yard or the ton and what their topsoil weighs.
- Skipping the soil test. It tells you which fertilizer and lime the new soil needs.
What else to order
A small lawn patch, such as 4.07 cubic yards for 20 x 15 feet at 4 inches, is a smaller delivery than most suppliers allow, so ask about minimums. Once the soil is ready, size the grass with the sod calculator or the seed calculator. Always follow the soil-test recommendations for fertilizer and lime.
Calculators for this guide
Frequently asked questions
How much topsoil do I need for 1,000 square feet?
At 4 inches deep, 1,000 square feet needs about 12.3 cubic yards, or 13.6 with 10 percent for settling.
How many inches of topsoil do I need for grass?
New Mexico State University Extension says the absolute minimum soil depth for a lawn is 4 inches, and recommends 6 inches or more for deep roots. UNL Extension also gives 4 inches as the minimum when topsoil is spread back after regrading.
How much does a cubic yard of topsoil weigh?
The topsoil calculator uses about 1.1 tons per cubic yard, and notes that real weight runs from about 1.0 to 1.3 tons depending on moisture and organic content. Ask your supplier what theirs weighs.
Sources and further reading
- Turfgrass Establishment (Guide H-509) — New Mexico State University Extension
- Establishing Lawns From Sod — University of Nebraska-Lincoln Extension
- Establishing Lawns From Seed — University of Nebraska-Lincoln Extension
More guides
Estimates only. Always confirm quantities with your supplier or a qualified contractor before ordering, and add extra for waste and site conditions.