Roofing Calculator: Squares, Shingles & Materials

Estimate roof area, roofing squares, shingle bundles, underlayment rolls, ridge cap and drip edge for a gable or hip roof from the building footprint and pitch.

Quick answer

A roof's true area is its footprint times a pitch factor: 1.118 at 6/12 and 1.414 at 12/12. One roofing square is 100 sq ft, about 3 bundles of shingles. A 28 × 40 ft house at 6/12 has about 12.5 squares, so roughly 42 bundles with 10% waste.

Your numbers

ft
ft
ft
Each side
%
$

Result

How to use a roofing calculator: roof area, squares and shingles

A pitched roof is bigger than the footprint of the building beneath it. The steeper the pitch, the more surface there is to cover. Multiply the footprint (including overhangs) by a pitch factor to get the true roof area.

10 ft10 ft1 square= 100 sq ft≈ 3 bundles(most architectural shingles)
One roofing square is 100 sq ft: a 10 ft × 10 ft patch of roof.
pitch factor = √(1 + (rise ÷ 12)²)
roof area = footprint × pitch factor
squares = roof area × (1 + waste) ÷ 100
bundles = squares × 3

Roofers measure in squares: one square equals 100 square feet. Architectural asphalt shingles usually come three bundles to a square.

Pitch multiplier chart

PitchMultiplierAngle
2/121.0149.5°
3/121.03114.0°
4/121.05418.4°
5/121.08322.6°
6/121.11826.6°
7/121.15830.3°
8/121.20233.7°
9/121.25036.9°
10/121.30239.8°
12/121.41445.0°

How to find your roof pitch

Place a level 12 inches along a rafter in the attic and measure straight up to the rafter. That vertical distance in inches is the rise (6 inches = 6/12 pitch). From the ground, you can also hold a level against the roof edge or use a phone inclinometer app.

How much waste should you allow?

Roof typeWaste
Simple gable10%
Hip roof12%
Valleys, dormers, chimneys15% or more

What else does a roof need?

Besides shingles you'll need underlayment, starter strips along the eaves, ridge cap shingles, drip edge, flashing, roofing nails, vent boots and, in cold climates, ice-and-water shield along the eaves and valleys. Steep roofs (8/12 and up) are dangerous to walk, so many homeowners hire a pro; use this estimate to check contractor quotes.

Walls under the roof? See the siding and insulation calculators.

Squares and bundles by roof size

For a 6/12 gable roof (pitch multiplier 1.118) with 10% waste and 3 bundles per square. Footprint includes the overhang.

FootprintRoof areaSquares with wasteBundles
1,000 sq ft1,118 sq ft12.337
1,500 sq ft1,677 sq ft18.456
2,000 sq ft2,236 sq ft24.674
2,500 sq ft2,795 sq ft30.793
3,000 sq ft3,354 sq ft36.9111

Roof pitch in degrees

PitchAngleMultiplier
2/129.5°1.014
3/1214.0°1.031
4/1218.4°1.054
6/1226.6°1.118
8/1233.7°1.202
10/1239.8°1.302
12/1245.0°1.414

Worked example: a 2,000 sq ft hip roof at 8/12

A hip roof with a 2,000 square foot footprint (overhang included) at 8/12 has a multiplier of 1.202, so the surface is 2,000 × 1.202 = 2,404 sq ft. Adding 12% waste for a hip roof gives 2,692 sq ft, or 26.9 squares. At three bundles per square that is 81 bundles.

Gable, hip and complex roofs

The calculator assumes 10% waste for a simple gable, 12% for a hip roof and 15% for a roof with valleys, dormers and chimneys. More cuts and more edges mean more offcuts. Treat these as planning figures and let your roofer confirm the quantity for your design.

Measuring safely

Ordering tips

Frequently asked questions

How many bundles of shingles are in a square?

Most architectural and 3-tab shingles come three bundles to a square (100 sq ft). Some premium or heavy shingles are four bundles per square.

How many bundles of shingles do I need for a 2,000 sq ft roof?

A 2,000 sq ft roof is 20 squares, so about 60 bundles; with 10% waste, 66 bundles.

How do I find my roof pitch?

Measure the rise over 12 inches of horizontal run with a level and tape. 6 inches of rise over 12 inches of run is a 6/12 pitch.

How much waste should I add for roofing?

Add about 10% for a simple gable roof, 12% for hip roofs, and 15% or more for valleys, dormers or complex shapes.

How many squares are in a roof?

Divide the total roof area in square feet by 100. A 28 × 40 ft footprint at 6/12 pitch is about 12.5 squares before overhangs and waste.

How long does a roof take to shingle?

A typical house takes a crew 1–3 days; DIY can take a week or more depending on size and pitch.

How much does roofing cost per square?

Asphalt shingle roofs are commonly quoted at several hundred dollars per square installed, varying widely by region, pitch and tear-off. Get local bids.

Does this calculator work for a flat or metal roof?

The area result does. For a flat roof, pitch 2/12 gives a multiplier near 1.0; use the area to order membrane, rolled roofing or metal panels instead of shingles.

Sources and further reading

These references support the general guidance on this page. The calculator applies the standard formulas shown above to the numbers you enter.

Embed this calculator on your website

Free to use on any site. Paste this code where you want the calculator to appear. More about embedding.

Related calculators

Guides and how-tos

. Estimates only. Always confirm quantities with your supplier or a qualified contractor before ordering, and add extra for waste and site conditions.