How Many Bags of Mulch Are in a Cubic Yard?

In short

A cubic yard is 27 cubic feet, so it equals 13.5 two-cubic-foot bags (buy 14), 9 three-cubic-foot bags or 18 bags of 1.5 cubic feet. One yard covers 108 square feet at 3 inches deep. A 20x6 foot bed at that depth needs 1.11 cubic yards, or 15 bags of 2 cubic feet.

The answer: 13.5 bags of 2 cubic feet

A cubic yard is 27 cubic feet, so the number of bags in a yard is 27 divided by the bag size. Bagged mulch is usually sold in 2 cubic foot bags, which makes 13.5 bags a yard, and in practice you buy 14. Hunker's mulch coverage article says the same: 14 two-cubic-foot bags to match one cubic yard.

Bag sizeBags per cubic yard
1 cu ft27
1.5 cu ft18
2 cu ft14
3 cu ft9

These counts are rounded up to whole bags. Always use the cubic feet printed on the bag, since sizes differ between brands.

How far one yard goes

Coverage depends on depth. Hunker's chart gives these areas for one cubic yard of mulch, and the mulch calculator agrees with each.

DepthArea per cubic yardMulch needed (cu yd)
1 in324 sq ft1.00
2 in162 sq ft1.00
3 in108 sq ft1.00
4 in81 sq ft1.00

How far one bag goes

DepthArea per 2 cu ft bagBags (calc)
2 in12 sq ft1
3 in8 sq ft1
4 in6 sq ft1

At 3 inches deep, a bag covers 8 square feet, so 100 square feet takes about 12.5 bags and the calculator rounds a bed of that size up to a whole number of bags.

How deep should mulch be?

Iowa State University Extension says a 3 to 4 inch layer of wood chips or shredded bark is appropriate on well-drained sites around trees and shrubs, and that on heavy soils a 2 to 3 inch layer is suitable. It also says to keep mulch at least 6 inches away from tree trunks. Use that depth range in the table above to size your order. A thicker layer costs more and does not always help, since the extension advice on heavy soils is to stay at the lower end, so pick the depth for your soil first and then count the bags.

Worked example: a 20 x 6 foot bed at 3 inches

The bed is 120 square feet. At 3 inches deep it needs 30 cubic feet, which is 1.11 cubic yards. In 2 cubic foot bags that is 15 bags, or 10 bags if you buy 3 cubic foot bags. At the calculator's default prices of $38 per cubic yard and $4.50 per bag, bulk costs about $42 and bags about $68. Those are placeholder prices, so put in the real numbers from your supplier. The cheaper option changes with price and with delivery fees.

Bulk or bags?

For a small bed, bags are convenient and need no delivery. Hunker notes that bulk delivery is usually more economical for large areas, while bags avoid delivery fees and can often be returned if unused. As a rule, once you need more than a yard or so, price a bulk delivery and compare it with the cost of the bags, including your time to haul and carry them.

Moving it by wheelbarrow

If you take a bulk delivery, the pile arrives on a driveway and has to be moved. The calculator counts wheelbarrow loads of 6 cubic feet, which is 4.5 loads for each cubic yard. The 20 x 6 foot bed above takes 5 loads. That is a good reason to schedule the delivery for a day when you have time and help, and to ask the driver to place the pile as close to the bed as the truck can safely get.

Common mistakes

What else to consider

If you only know the length of a bed, a strip of 1 foot width at 3 inches takes 0.93 cubic yards per 100 feet. For a conversion between yards and cubic feet, use the cubic yard calculator.

Calculators for this guide

Frequently asked questions

How many 2 cubic foot bags of mulch make a yard?

13.5, so you buy 14. A cubic yard is 27 cubic feet, and 27 divided by 2 is 13.5. Hunker's coverage article uses the same 14-bag figure.

How many bags of mulch do I need for 100 square feet?

At 3 inches deep, 100 square feet takes 25 cubic feet, which is 13 bags of 2 cubic feet.

How deep should mulch be?

Iowa State University Extension recommends a 3 to 4 inch layer of wood chips or shredded bark on well-drained sites around trees and shrubs, and 2 to 3 inches on heavy soils, with mulch kept at least 6 inches from the trunks of trees.

Sources and further reading

More guides

Estimates only. Always confirm quantities with your supplier or a qualified contractor before ordering, and add extra for waste and site conditions.