How Many Bricks Are in a Square Foot of Wall?
A standard modular brick takes about 6.86 bricks per square foot of wall with a 3/8 inch mortar joint. A 20x8 foot wall (160 sq ft) needs 1,098 bricks, or 1,207 with 10 percent extra. Larger brick types need fewer, and a double-wythe wall needs twice as many.
The short answer: about 6.86 bricks per square foot
A standard modular brick is 3 5/8 x 2 1/4 x 7 5/8 inches, and with a typical 3/8 inch mortar joint it takes about 6.86 bricks to cover one square foot of wall face. Glen-Gery's brick size chart lists exactly that figure for modular brick, and Hunker's brick-counting guide uses the same size and number. The count assumes a single layer of brick laid flat, with the long face showing.
For a modular brick that is 144 / (8 x 2 5/8) = 6.86. The joint matters because each brick takes up its own face plus a share of the mortar around it.
Bricks per square foot by brick size
Face sizes differ, and the bigger the face, the fewer bricks you need. These figures come from the brick calculator with a 3/8 inch joint and match the published charts (Glen-Gery rounds Norman to 4.6).
| Brick type | Face (L x H) | Bricks per sq ft | Bricks per 100 sq ft |
|---|---|---|---|
| Modular | 7 5/8 x 2 1/4 in | 6.86 | 686 |
| Queen | 7 5/8 x 2 3/4 in | 5.76 | 576 |
| Norman | 11 5/8 x 2 1/4 in | 4.57 | 458 |
| Utility | 11 5/8 x 3 5/8 in | 3.00 | 300 |
The right-hand column is for 100 square feet before any extra. Always confirm the exact size with the supplier, since makers vary and some brick is not modular. Hunker's chart lists a standard non-modular brick (3 5/8 x 2 1/4 x 8 inches) at 6.55 per square foot, which is a different number from a modular brick.
Worked example: a 20 x 8 foot wall
A 20 foot long, 8 foot tall wall is 160 square feet. With modular brick, a 3/8 inch joint and no openings, that is 1,098 bricks. Waste comes next. Bricks chip, cuts leave offcuts, and a bond pattern with many cuts uses more, so the calculator defaults to 10 percent. At 10 percent the order is 1,207 bricks.
Now subtract the openings. Suppose a window and a door together take 30 square feet. The net area is 130 square feet, which is 892 bricks before waste and 981 with 10 percent extra. That is 226 fewer bricks than the solid wall, so measuring the openings is worth doing.
How the joint changes the count
Hunker notes that 3/8 inch is the standard joint behind its table, and that 1/2 inch joints are also used. A wider joint spreads the bricks apart, so you need fewer of them. The same 20 x 8 foot wall with a 1/2 inch joint takes 1,135 bricks with 10 percent extra, compared with 1,207 at 3/8 inch, which is 72 fewer. The joint also adds mortar, and Glen-Gery says mortar accounts for approximately 20 percent of a modular brick wall at a typical 3/8 inch joint.
Single wythe versus double wythe
A wythe is one layer of brick. Veneer and most garden walls are single wythe, and that is the 6.86 per square foot case. A double-wythe wall has two layers, so it needs twice as many bricks: 2,414 for the 20 x 8 foot wall with 10 percent extra. If the wall is thicker than one brick, set the calculator to double.
Why nominal and specified sizes give slightly different numbers
You may see 6.75 bricks per square foot quoted for modular brick. That comes from the nominal module of 8 x 2 2/3 inches (144 / (8 x 2.667) = 6.75), where the nominal size is the brick plus one joint. The 6.86 figure uses the brick's specified 7 5/8 x 2 1/4 inch size plus a 3/8 inch joint. The two differ by under 2 percent, which your waste allowance absorbs. Glen-Gery's design article puts modular coursing at six courses per 16 inches, which lays 36 courses in 8 feet. The calculator shows 37 for the same height because it rounds up, so do not use its course count to plan the layout.
Common mistakes
- Using a count for the wrong brick. A queen, Norman or utility brick has a very different number per square foot.
- Ignoring waste. The exact count is a minimum, and the 10 percent default is a sensible starting point.
- Forgetting the second layer. A double-wythe wall doubles the count.
- Not subtracting openings. Doors and windows are not brick.
- Buying in two lots. Brick color varies between production runs, so order everything, including the extra, at the same time.
What else to order
Bricks are only part of the wall. You also need mortar, which is roughly a fifth of what you see on the wall face, and a footing or base for any freestanding wall. A chimney, an arch or a retaining wall is structural, so check your local code and a professional's plans before you build. If you are laying bricks flat as a patio, use the paver calculator rather than wall math.
Calculators for this guide
Frequently asked questions
How many bricks are in a square foot?
About 6.86 for standard modular brick (3 5/8 x 2 1/4 x 7 5/8 inches) laid with a 3/8 inch mortar joint. Queen brick takes 5.76, Norman 4.57 and utility brick 3.00.
How many bricks do I need for 100 square feet?
For modular brick that is 686 bricks before waste. With 10 percent extra for cuts and breakage you would order about 755.
Do I need twice as many bricks for a thicker wall?
Yes, if the wall is two bricks thick. A double-wythe wall doubles the count, so the 20x8 foot example goes from 1,207 to 2,414 bricks with 10 percent extra.
Sources and further reading
- Brick Sizes & Dimensions — Glen-Gery
- How to Calculate the Number of Bricks per Square Foot — Hunker
- Designing in Brick: Select the Ideal Brick Size for Your Home — Glen-Gery
More guides
Estimates only. Always confirm quantities with your supplier or a qualified contractor before ordering, and add extra for waste and site conditions.